miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
42
9.
Click the Erase-Program-Verify button. The progress bar will update. After some time, the status will
update to show successful completion.
DO NOT DISCONNECT THE USB CABLE OR POWER FROM THE nanoAVR DL WHILE THIS IS IN
PROGRESS. DOING SO MAY “BRICK” YOUR nanoAVR DL.
10.
Click the
Run Application
button to reboot the nanoAVR DL.
11.
Click the
Disconnect
button
12.
Close the
PIC32UBL
application.
Provided firmware update was successful, you can now continue to use the nanoAVR DL as before.
6.4
O
BTAINING
S
UPPORT
1.
Check the forums on miniDSP.com to see if your issue has already been raised and a solution or solutions
provided.
2.
Contact miniDSP via the support portal at
minidsp.desk.com
with:
a.
The specific product you are having an issue with (in this case, nanoAVR DL).
b.
A clear explanation of the symptoms you are seeing.
c.
A description of the troubleshooting steps (see
Troubleshooting
above) you performed and the results
obtained.