miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
13
Notes:
1.
The serial number that must be entered in the activation screen is
not
the serial number printed on the
hardware unit. A unique serial number specific to Dirac Live is programmed into the firmware of each unit
and can only be accessed with the
nanoAVR DL Utility
program (step 3 above).
2.
The email address and username used during license activation and validation are not related to your user
account on miniDSP.com. To activate and validate a Dirac Live license, you must create an account on the
Dirac server using the form shown at left in step 4 above.
3.
If you purchase more than one
NanoAVR DL
or
Dirac Series
processor, each will need to be activated with
its unique serial number. Use the form shown on the right in step 4 above and enter the serial number of
each additional processor, and they will in turn be added to your license.
2.1.4
License validation
Start the
Dirac Live Calibration Tool For miniDSP
program. It will ask you to validate your software license. Enter
the email address and password that you used when activating your license, and then click on
Validate
:
You will need to be connected to the Internet to validate your license. Any active firewalls will need to have
HTTP (normal web traffic) enabled.
The
Username
in the validation screen must be the
email address
that you used in the activation screen
above. It is not your miniDSP website username.
