miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
16
3.3
AN-FP
AND
DA-FP
AN-FP is an audio interface board that provides stereo balanced analog I/O on Neutrik panel-mount connectors.
DA-FP provides the same set of digital inputs as the DIGI-FP (previous page), and stereo balanced analog output
on Neutrik panel-mount connectors. Both boards also provide a USB Type B socket.
The AN-FP and DA-FP require that three cables (supplied with the board) be connected to the miniSHARC. A 14-
pin flat ribbon cable carries I2S and control signals. The AN-FP and DA-FP also require separate 5V power. To
facilitate a simple wiring scheme, the AN-FP and DA-FP provide two power connectors, which can be used as
shown in the photograph below.
A 5-pin cable carries USB between the miniSHARC and the panel-mount USB connector. Connect it as shown in
the photograph below, taking careful note of the orientation of the connector as indicated by the arrows.
Note that to use the AN-FP and DA-FP, the miniSHARC must be in I2S master mode (page 19).
