miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
15
3.2
DIGI-FP
DIGI-FP is an audio interface board intended for panel mounting that provides stereo digital input and output in
three formats:
•
S/PDIF (RCA)
•
Optical (TOSLINK)
•
AES/EBU (XLR)
The DIGI-FP contains an on-board asynchronous sample rate convertor (ASRC) that converts the input signal to
the sample rate set by the miniSHARC plugin (48 or 96 kHz). In addition, it provides a USB Type B socket.
The DIGI-FP requires that two cables (supplied with the DIGI-
FP) be connected to the miniSHARC. A 14-pin flat ribbon
cable carries power, I2S and control signals. Connect it as
shown in the photograph at right.
A 5-pin cable carries USB between
the miniSHARC and the panel-mount
USB connector. Connect it as shown
in the photograph at right, taking
careful note of the orientation of the
connector as indicated by the arrows.
Note that to use the DIGI-FP, the
miniSHARC must be in I2S master
mode (page 19).
