miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
43
5.6
M
ASTER
/S
LAVE MASTER CLOCK SELECTION
The MCLK jumper, located in the center of the board, selects the source of the master clock:
•
If the board is used standalone, it generates its own master clock. In this case, the jumper must be in the
Master
position.
•
If the board is used with an external device that generates the I2S signals, the board must slave to the
external clock. In this case, the jumper must be in the
Slave
position.
5.6.1
Examples
Board used standalone or with miniAMP only
Set jumper to
Master
.
Board used with miniDIGI, or with mminiAMP
Set jumper to
Slave
.
Board used with USB interface and direct I2S connection
Set jumper to
Slave
.
