miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
39
7.3
I
NFRARED REMOTE CONTROL
Many standard and programmable remote control units can
be used with the DDRC-88D. By default, the DDRC-88D
recognizes the Apple Remote, with the key assignments
shown at right.
(The commands
Config Inc
and
Config Dec
change the
selected configuration preset up or down. For example, if
the currently selected preset is
1
, pressing
Config Inc
changes it to
2
. Note that switching between presets takes
several seconds.)
In addition, the DDRC-88D can
“learn” the control codes of your current remote if it supports one of the
following remote control codes:
•
NEC
•
Sony
•
Philips RC6
To initiate the learning process, run the DDRC-88BM plugin and click
Connect
. Drop down the IR Remote menu
and select
IR learning
. Click on the
Learn
button for an operation, and then press the desired button on the
remote control. If the code is accepted, a dialog will appear to show that the code was recognized the status will
change to show a tick.
If the processor does not recognize the remote control code, then it will time out and display a message saying
that IR learning failed.
Once programmed, check that the programmed buttons perform the expected function.
To "unlearn" a command, press the
Learn
button and wait for the plugin to time out.
To restore the default Apple remote commands, “unlearn”
all commands.
