Minicom IP Control, User Manual

Page: 33 / 63

2. In the
Account Blocking

In
Block after
, type
username or password
forced time lock.

In
Block account
, select
time, or
forever
for a total block
3. Select the
High security password policy
password policy; clear the checkbox for the standard security policy to apply.
4. In
Disconnect after
, select the timeout
disconnected from the system. Select
3.9 Configuring the System Date and Time
This section describes how to configure the system date and time.
To configure the date and time
1. From the configuration menu, select
The Date and time page
Configuring
Configuring the System Date and Time
Figure 21 – Security Page
Account Blocking
section:
e the number of allowable attempts to log in with a wrong
username or password in a time period specified in
attempts within
, select
for period
to block the account for a specified period of
or a total block.
High security password policy
checkbox to enable the high security
password policy; clear the checkbox for the standard security policy to apply.
, select the timeout inactivity period after which the user is
disconnected from the system. Select
No Timeout
to disable timeout.
Configuring the System Date and Time
This section describes how to configure the system date and time.
configure the date and time:
From the configuration menu, select
Date & Time
.
page appears.
Figure 22 – Date and Time Page
Configuring the Network
the System Date and Time
User Guide
|
31
in with a wrong
attempts within
, prior to a
to block the account for a specified period of
checkbox to enable the high security
password policy; clear the checkbox for the standard security policy to apply.
inactivity period after which the user is
imeout.