Minicom IP Control, User Manual

Page: 36 / 63

Configuring the Network
Reloading a Page
34
| IP Control
The unit reboots. After about 30 seconds, the Login page appears.
Depending on the type of firmware upgrade, the following settings may
erased: User settings, KVM switch settings, mouse and video adjustments
RS232 settings. The network settings remain intact.
to the firmware release notes.
3.10.3
Restoring Factory Settings
You can restore the IP Control unit to
Control parameters, resetting all the information added by the administrators,
including: Network settings*, Servers, Switches, Users,
* You have the option to preser
procedure.
Once reset, the data cannot be retrieved.
To restore factory settings
1. In the toolbar, select
The Restore Factory Settings
Figure
2. To preserve network settings, select the
3. Click
Restore
.
Factory settings are restored
3.11 Reloading a Page
You can load the parameters on any configuration page with the settings from the IP
Control device. This is convenient if you have already changed settings on the page,
and want to restore the device settin
To reload a page:
1. In the Configuration page
The unit reboots. After about 30 seconds, the Login page appears.
Depending on the type of firmware upgrade, the following settings may
erased: User settings, KVM switch settings, mouse and video adjustments
RS232 settings. The network settings remain intact. For more information
to the firmware release notes.
Restoring Factory Settings
You can restore the IP Control unit to its factory settings. This restores the original IP
Control parameters, resetting all the information added by the administrators,
including: Network settings*, Servers, Switches, Users, and Passwords.
option to preserve Network settings – as explained in the following
Once reset, the data cannot be retrieved.
restore factory settings:
.
Restore Factory Settings page appears.
Figure 26 – Restore Factory Settings Page
To preserve network settings, select the
Preserve network settings
checkbox
Factory settings are restored.
Reloading a Page
You can load the parameters on any configuration page with the settings from the IP
Control device. This is convenient if you have already changed settings on the page,
and want to restore the device settings.
Configuration page toolbar, click the button.
Depending on the type of firmware upgrade, the following settings may be
erased: User settings, KVM switch settings, mouse and video adjustments, and
For more information, refer
factory settings. This restores the original IP
Control parameters, resetting all the information added by the administrators,
as explained in the following
checkbox.
You can load the parameters on any configuration page with the settings from the IP
Control device. This is convenient if you have already changed settings on the page,