SMARTBOX OPERATING MANUAL—JUNE 2009
5
3. Override Procedures
For the purpose of security, please change the factory master codes prior
to use. Please keep the emergency key in a safe place.
1)
TO OPEN THE SAFE WITH MASTER CODE USING SAFE KEYPAD
a)
Enter the master code in use (pre-selected 0-0-0-0-0-0)
b)
the door will open automatically, display will show
“OPENED”
To Set a New Master Code (it must be 6 digits)
To change the master code, the safe must be opened (i.e. the bolts are retracted).
a)
Press key
“*”
twice, the display shows
“PROG”
b)
enter old master code (pre-selected 0-0-0-0-0-0).
c)
When display shows
“NEW”
, enter a new master code of 6 digits.
d)
The display will show
“AGAIN”
. Re-enter the new master code, the display will show
“DONE”
to indicate that new master code has been changed successfully.
Note: Do not use Master Code if override procedure is done with Handheld Unit
(see Chapter 3.3 To Open the Safe with Handheld Unit)
