SMARTBOX OPERATING MANUAL—JUNE 2009
13
5. Programming Instructions
1)
HOW TO MODIFY THE MANAGER CODE OF HANDHELD UNIT
a)
Emergency unit position: On
b)
Press the
“*” (CLEAR)
button, the word
“PROG”
will appear on the screen.
c)
Enter the current existing code (factory code is 5555)
d)
Press
“*” (CLEAR)
key, then Press
“1”,
the word
“NEW- C1”
will appear on the screen.
e)
Enter a new 4 digit code and
“#” (ENTER).
The word
“DONE”
will appear on the screen.
2)
HOW TO MODIFY OPENING CODE OF HANDHELD UNIT
a)
Press the
“*” (CLEAR)
button twice, the word
“PROG ”
will appear on the screen.
b)
Enter the current existing code (factory code is 6666)
c)
Press
“*” (CLEAR)
and
“2.”
The word “
NEW- C2 ”
will appear on the screen.
e)
Enter a new 4 digit code and
“#” (ENTER).
The word
“DONE”
will appear on the
screen.
3)
HOW TO SET SERIAL CODE ON THE HANDHELD
a)
Press twice the “
*
”
(
CLEAR
) button. “
PROG
” will appear on the screen.
b)
Press “
8100 * 5
,” “
NEW
” will appear on the screen.
c)
Enter new serial code on handheld unit (same as safe serial code) and press “
#
”
(
ENTER
). “
AGAIN
”
will appear on the screen.
d)
Enter the serial code again and press “
#
” (
ENTER
) to confirm, “
DONE
” will appear on
the screen, the new serial code is set.
Explanation
1) The back-up serial code for the safe and corresponding Handheld on delivery from manufacturer is
“000000.” Please note that the safe’s serial code is fixed, but you may modify the Handheld Unit’s
serial code according to the above instructions. You can open the safe with the Handheld Unit only
when both the handheld and safe codes are identical. We differ the serial code for the safe and
Handheld Unit in order to secure the customer’s property.
2) When you forget the opening code or manager code and execute the emergency operation to reset
them to 5555 and 6666 respectively, you must reset the Handheld Unit’s serial code to “000000”
synchronously. So you must modify the Handheld Unit’s serial code to keep it consistent with the
safe.
