PAGE 1 OF 9
1120 IH-8940
H-8940
FIRE RATED FLOOR SAFE
1-800-295-5510
uline.com
TOOLS NEEDED
HARDWARE INCLUDED
Drill
70 mm Lag Screw x 2
Washer x 2
40 mm Plastic Anchor x 2
7/16" Drill Bit
Phillips Screwdriver
17 mm Socket Wrench
USAGE
IMPORTANT! Record the serial number from the
tag on back of safe.
Keep keys and combination in a secure place,
away from children.
Do not store backup key, combination or this
document in the safe.
WARNING! Keep safe closed and locked at
all times when not in use. Children could
accidentally be locked inside the safe.
Do not move this safe using its handle. The
handle should only be used for opening and
closing the door of the safe.
Do not store electronic media, computer disks,
audio-visual media or photographic negatives
in this safe. This material will not survive the
rated internal temperature of the safe. This
material may be damaged or destroyed.
HANDLE ASSEMBLY
1. Screw three handle spokes into hub and hand
tighten. Spokes are located in front foam
packaging. (See Figure 1)
NOTE: Do not use this handle to move the safe.
BATTERY INSTALLATION
User must first install the battery. When battery is low and
button is pressed on keypad, a red light will come on
warning that battery is low.
NOTE: When changing the battery, always
hold the battery connecting cap while
disconnecting or attaching the battery. Do not
pull on the wires. Doing this could cause the
power supply to become disconnected from
the lock.
1. To replace battery, remove cover by pressing the
tab and turning cover. (See Figure 2)
2. Replace old battery and turn cover back in place.
Use one 9V alkaline battery.
Figure 1
Figure 2
