19
Manual Mode
Stimulation Functions:
There are nine functions in your iLightz that can be selected for dis-
play and control. One of the nine function lights will be highlighted, telling you which function
is selected. To select a different function, use center keys or Manual / Back. The current value
of the selected function is always shown in the display, and the right side keys on keypad (top
right = increase, bottom right = decrease) are used to change any of the specific values.
iPod:
Adjusts the audio sound level / volume control of your iPod.
COL:
The iLightz has the ability to display 511 (512 if you include “black”) different colors
when using our proprietary “color matrix” glasses. Choices include: blue, green, red, white,
TSX (Turbosonix), CM1, CM2, CM3, RCM and RGB (Red-Green-Blue). For RGB custom
color adjustments the following “outer keys” are used:
· The upper left adjusts the
Red
values 0-7
· The lower left adjusts the
Green
values 0-7
· The lower right adjust the
Blue
values 0-7
· The upper right does not do anything.
Frequency:
Ranges from 0.5-40.0 Hz.. The FREQUENCY function controls the rate of stimu-
lation pulses in the lightframes and in the earphones in all pulsed tone selections. When binau-
ral sound is selected, it controls the difference, or beat frequency of the two tones. This function
controls the frequency of entrainment of brain waves.
To move from one value to the next, use center keys or
Manual / Back. To change any of the following particular val-
ues, use right side keys on keypad (Top right = increase, bottom
right = decrease)
iPodV =
volume control for iPod
COL =
light stimulation color mix
FREQ =
frequency stimulation
TON =
tone (binaural or pulsed beats)
PHS =
phase
DC =
duty cycle
PITCH =
note scale (1 F# - 36 F)
IN =
light stimulation intensity (brightness level)
VOL =
audio stimulation (sound level)
