Minelab Manticore, Instruction Manual

Page: 56 / 78

CONTENTS
56
Ground Balance
(Continued)
MANUAL GROUND BALANCE
Ground Balance can be manually adjusted until the
minimum amount of ground signal is present�
Manual Ground Balance Procedure
1. Navigate to Ground Balance:
Settings > Ground Balance
2. Raise and lower the Coil repeatedly over a clear patch of
soil that does not contain any targets�
3. Listen to the audio response to interpret the result
of the Ground Balance; a low tone indicates that you
should increase the Ground Balance value and a high
tone indicates that you should decrease it�
4.
Press  /  to manually change the Ground Balance value
until the minimum amount of ground signal is heard�
NOTE:
Tracking Ground Balance will be automatically
turned Off if Ground Balance is adjusted manually�
TRACKING GROUND BALANCE
Tracking Ground Balance continuously monitors the ground
signal and adjusts the Ground Balance setting to ensure it
is always set correctly� This is useful in locations where the
ground signals are constantly changing, so you don't have
to continually perform a Ground Balance�
Tracking Ground Balance is the default and recommended
Ground Balance method for Beach Surf & Seawater
mode and Goldfield General mode� It effectively manages
the constantly changing conditions in salt‑water and
mineralised goldfield soils�
Turn Tracking Ground Balance On/Off
1. Navigate to Ground Balance:
Settings > Ground Balance
2. Press the Right Soft Key ( Tracking) to turn Tracking
Ground Balance On/Off�
When Tracking is On, the Tracking icon ( ) is displayed
in the Status Bar�
NOTE: Tracking Ground Balance will be automatically
turned Off if Ground Balance is adjusted manually�
58 42
Ground Balance
0
The Ground Balance value
will update automatically
as it tracks to changing
ground conditions�