Minelab Manticore, Instruction Manual

Page: 35 / 78

CONTENTS
35
Soft Keys
Three Soft Keys can be assigned an Action, allowing you
to customise the user interface� They provide convenient
shortcuts for your favourite settings�
User‑assigned Soft Key functions are only available from
the Detect Screen�
The Side Soft Key is the
bottom right Side Button
on the Control Pod� Actions
assigned to it do not display an
icon until the Soft Key
is pressed�
The Action Bar Soft Keys are
the top left and right buttons
on the Keypad, directly below
the Action Bar�
ASSIGN THE SOFT KEYS
1. Long‑press the Side Soft Key ( ) to open the Soft Keys
Selector, or navigate to it via the Settings Menu:
Settings > General Settings > Soft Keys , then
Press  to open the Soft Keys Selector�
2. Press

/

to select the Soft Key you want to assign —
the selected Soft Key is highlighted in red�
3. Press

/

to cycle through the assignable Soft Key
Actions� Changes are automatically applied�
When you return to the Detect Screen, the Soft Key
icons in the Action Bar will show the newly assigned
Actions for the Left and Right Soft Keys�
Soft Keys
Favourite Mode
--
20
The Action Bar
The Soft Keys Selector and the resulting Action Bar on the Detect Screen�
SOFT KEY ACTIONS
Favourite Mode
Toggles between the Favourite Search Mode and the
last‑used Search mode�
The Favourite search is user‑definable; see "Set the
Favourite Search Mode" on page 59 �
All Metal
Press the Soft Key to turn All Metal On/Off�
Accept / Reject
When All Metal is Off, press the Soft Key ( Reject)
to reject IDs when they are detected�
When All Metal is On, press the Soft Key ( Accept)
to accept IDs when they are detected�
Noise Cancel
Press the Soft Key to perform an Auto Noise Cancel�
Press‑and‑hold to perform a Continuous Auto Noise
Cancel (not available for the Side Soft Key)�
Ground Balance
Turns Tracking Ground Balance On/Off�
Press‑and‑hold while raising and lowering the Coil
over the ground to perform an Auto Ground Balance
(not available for the Side Soft Key)�