Minelab Manticore, Instruction Manual

Page: 36 / 78

CONTENTS
36
Reset
For information on how to reset a single Search Mode only,
see
"Reset a Search Mode" on page 60 �
FACTORY RESET
Factory Reset can be done in two ways; via the Settings
Menu, or via the Power Button�
Factory Reset will return all detector settings to their
default state, including Search Modes�
Reset Via the Settings Menu
1. Turn the Detector On ( )�
2. Navigate to Reset:
Settings > General Settings > Reset
3. Press  to display the Reset confirmation screen�
4.
A warning message will be displayed — if you are
sure you want to reset the detector, confirm again by
pressing the Right Soft Key
( Confirm) �
There will be a confirmation tone and message when
Reset is complete�
Reset Via the Power Button
1.
Turn the Detector Off ( )�
2. Press‑and‑hold the Power button ( ) until there is
a confirmation tone and 'Factory Reset Complete'
message�
3.
Release the button�