8
2. Operating Instructions
This section describes how to operate the equipment using the keys on the front panel.
CAUTION
Stop measuring before operating the keys. There is a risk of malfunctioning if the keys are operated
while measurement is in progress.
Key operations in measurement mode are enabled by depressing for approximately 1 second.
2-1.
Key
2-1-1.
When Operated in Measurement Mode
This selects function mode and
is displayed on the setting display.
Function setting or other modes can be selected in this mode.
2-2.
Key
2-2-1.
When Operated in Measurement Mode
Pressing this button activates the auto-zero function and zeros the torque reading if the value displayed
on the torque display is 10% or less of the maximum value. [A/Z] is also displayed on the status display.
2-2-2.
When Operated in Other Modes
Pressing the
key when a setting is displayed causes the flashing digit to move to the left in the
sequence 10
1
, 10
2
, 10
3
, 10
4
. (Note that the range of movement will vary depending on the number of
digits and sign displayed.)
2-3.
Key
2-3-1.
When Operated in Measurement Mode
This cancels the auto-zero function, and [A/Z] disappears on the status display.
2-3-2.
When Operated in Other Modes
Pressing the
key when a setting is displayed causes the flashing digit to move to the right in the
sequence 10
4
, 10
3
, 10
2
, 10
1
. (Note that the range of movement will vary depending on the number of
digits and sign displayed.)
2-4.
Key
2-4-1.
When Operated in Measurement Mode
This has no effect.
