2.
Press the
Unit
button move to next menu item or
Mode
F
button move to previous
menu item.
3.
Change menu item until [CAL.ADJ] show on display.
4. Press
Off
(Yes) button enter into sub-menu item.
5.
Press the
Unit
button move to next menu item or
Mode
F
button move to previous
menu item.
6. Change menu item until [GEO] is displayed.
7.
Press
Off
(Yes) button to start GEO Factor selection.
The default GEO factor [12] is indicated and blinking.
8. If changing the value is needed, selection from 0 … 31, press the
Unit
button to
increase or the
Mode
F
button to decrease the GEO factor value.
9. Press
Off
(Yes) button to confirm GEO Factor value.
The GEO factor has been stored, when [END] is displayed.
10. Press
Off
(Yes) button to return to sub-menu selections.
11. Press
Unit
(No) button to return to the first item in the current menu.
12. Press the
Menu
M
+
button to exit the setup menu and return to the weighing mode.
7 Calibration and Adjustment
Floor scale Puro®
Minebea Intec
EN-43
