24
Operating Instructions Combics 3 Filling
Navigating in the application menu:
t
Press “
q
” or “
Q
” soft key to select the menu item.
t
Press the “
O
” soft key to open the menu item.
t
Press the “
q
” or “
Q
” soft key to select the desired setting
for the menu item.
Confirm selection with the “
l
” soft key. The active
setting is marked by a circle (
o
).
t
Press the
M
key or the “
oo
” soft key to save the
settings and leave the Setup menu.
Setting the Application Parameters
You can adapt the filling application to individual
requirements in the Setup menu, under “Application
Parameters”. You can enter user-specific information and
select from among defined parameters.
t
Press the
M
key to enter the Setup menu.
t
Press the “
O
” soft key to select the application
parameter.
y
The highest level of the application menu is displayed.
Application Menu Overview
Detailed descriptions of parameter options are given below, starting on page 24
* = Factory setting
Setup
Application
Coarse/fine control
Coarse flow *
Delay coarse (0.0…25.0 sec) (only option H4)
Parameters
Coarse and
Delay coarse (0.0…25.0 sec) (only option H4)
(optional:
fine flow
password
protection)
Add within
Manual
tolerance range
Automatic*, in tolerance range
Automatic to target value
Off (when selected, the menu item 'Optimize coarse/fine flow' is active)
Only option H4:
On (if selected, the menu item 'Add within tolerance range' is locked)
Optimize coarse/fine flow
Off *
Save results
Manual *
Delay: (0.0...25.0 sec) (only option H4)
Automatic
Delay: (0.0...25.0 sec) (only option H4)
Only option H4:
Parameters
Off *
Monitor material flow
On, minimum
Min.(/s): (0... 99999999.0, in units used on scale)
material flow
Start min.: (0.0...25.0 sec)
On, maximum
Max.(/s): (0... 99999999.0, in units used on scale)
material flow
Start max.: (0.0...25.0 sec)
On, min. and max.
Min.(/s): (0... 99999999.0, in units used on scale)
material flow
Start min.: (0.0...25.0 sec)
Max.(/s): (0... 99999999.0, in units used on scale)
Start max.: (0.0...25.0 sec)
Response
Display info only w/o stopping
to min.
Stop filling *
mat. flow error
Only option H4:
Input 1
Off *
Digital inputs
p
Print key
p
Print key hold
)
Tare key
J
ISO test
k
Fn key
n
Weighing point toggle key
OK key
Combined zero/tare function
(
Zeroing key
e
Power on key
c
CF key
v
F1 function key
D
Application toggle key
K
10x higher resolution key
L
Net-gross value key
Filling: Start
Filling: Interrupt
Filling: Cancel
Filling: Next
Input 2
...
Input 7
Operation
