Mindray DP-3200 Service Manual Download Page 3

Page: 3 / 81

Product Information

Product Name: Digital Ultrasonic Diagnostic Imaging System

Model: DP-3300

Issued date of this manual: 2006-08

Version: 1.1

Intellectual Property Statement

SHENZHEN MINDRAY BIO-MEDICAL ELECTRONICS CO., LTD. (hereinafter called

Mindray) owns the intellectual property rights to this Mindray product and this manual. This

manual may refer to information protected by copyrights or patents and does not convey any

license under the patent rights of Mindray, nor the rights of others. Mindray does not assume

any liability arising out of any infringements of patents or other rights of third parties.

Mindray intends to maintain the contents of this manual as confidential information.

Disclosure of the information in this manual in any manner whatsoever without the written

permission of Mindray is strictly forbidden.

Release, amendment, reproduction, distribution, rent, adaptation and translation of this

manual in any manner whatsoever without the written permission of Mindray is strictly

forbidden.

DP-3300/DP-3200

Installation Manual

（

V1.1

）

Summary of Contents for DP-3200


















































































Search results

Summary of Contents for DP-3200

Reviews:

Related manuals for DP-3200

Brands by name

Popular brands

Mindray DP-3200, Service Manual

Search results

Summary of Contents for DP-3200

Reviews:

Related manuals for DP-3200

Brands by name

Popular brands