Mindeo FS390, User Manual

Page: 32 / 127

24
6-5 USB interface
USB device type:
HID keyboard – By setting, the scanner is used as a USB HID keyboard emulation device.
USB virtual COM – By setting, the scanner emulate a regular RS-232-based COM port. If a Microsoft
Windows PC is connected to the scanner, a driver is required to install on the connected PC. The
driver will use the next available COM Port number. The driver and the installation guide can be found
in the associated CD and on the manufacturer’s website. A Windows-based software COM_Text is
recommended to display the barcode data in text format. COM_Text emulates some kind of serial-key
typing.
Simple COM Port Emulation - Please contact the manufacturer for the instruction.
Notes:
1) When change
USB Device Type
, the scanner automatically restarts.
2)
USB Device Type
will be changed to USB virtual COM if
Scan Mode
is set as Host. Besides, the
change of
USB Device Type
from the USB virtual COM to others is forbidden when
Scan Mode
is
Host.
Keyboard layout: The scanner supports different national keyboard layouts.
Inter-character delay: This delay is inserted after each data character transmitted. By selecting, the user
can change the output speed of the scanner to match the speed of the host USB communication port.
Numeric key:
Alphabetic key - The scanner will output code result as alphabetic key.
Numeric key - The scanner will output code result as pressing numeric keypad ( ‘0’, ‘1’, ‘2’, ‘3’, ‘4’, ‘5’,
‘6’, ‘7’, ‘8’, ‘9’, ‘.’, ‘+’, ‘-‘, ‘/’, ‘*’ only).
Alt+ keypad - The scanner will output code result as pressing Alt+ numeric key (on keypad). Note that
the Num Lock control key must be ON. This setting can be specially adapted for use with different
national keyboard layout.