Mindeo FS390, User Manual

Page: 18 / 127

10
The associated current draws of different power modes are listed in the following table.
Table 2-3 Current draws of different power modes @ 5V, 25°C
Power mode Description Current
Power-on I
Inrush
Maximum current spike seen when power is applied to
the scanner or when the scanner turns on for the first
time.
598 mA
Operate
I
OperatePeak
Peak current draw when the scanner is scanning. 432.5 mA
I
OperateAverage
Average current draw when the scanner is scanning. 280 mA
Idle
I
Idle, image on
Maximum current draw while not scanning or decoding,
but power is applied to the optics module.
Note 1
85 mA
I
Idle, image off
Maximum current draw while power is NOT applied to the
optics module.
68.5 mA
Standby I
Standby
Maximum current draw while in Standby power mode. 45 mA
Infrared I
Infrared
Maximum current draw added while the infrared sensor is
active.
11 mA
Note 1: While in Idle power mode, power can be removed from the optics module when Idle optics
module is enable, refer to
6-6 Scan mode & some global settings
.