The Minarik RG500 Series is a top-of-the-line motor controller for industrial applications. Ensure optimal performance by downloading the free User Manual from manualshive.com. This comprehensive manual includes all the information you need to operate and maintain your RG500 Series controller effectively. Don't miss out on this valuable resource!
47
Motor will not reach the desired speed
1. Check the MAX SPD setting and increase if necessary.
2. Check that the IR COMP setting is not set too low.
3. Check that the motor is not overloaded.
For additional assistance, contact your local Minarik® distributor,
or the factory direct at: PHONE: (800) MINARIK
FAX: (800) 394-6334
Troubleshooting
