Minarik MM30000 Series, User Manual

Page: 10 / 48

4 Installation
Warning
Do not install, remove, or rewire this equipment with
power applied. Failure to heed this warning may result in
fire, explosion, or serious injury.
Circuit potentials are at 115 VAC above ground. To
prevent the risk of injury or fatality, avoid direct contact
with the printed circuit board or with circuit elements.
Do not disconnect any of the motor leads from the drive
unless power is removed or the drive is disabled.
Opening any one motor lead may destroy the drive.

Ꮨ
Use 18–24 AWG wire for speed adjust potentiometer (S1, S2,
S3) wiring. Use 14–16 AWG wire for AC line (L1, L2), and
motor (A1 and A2) wiring.
Wiring
250-0146r3_readers_spreads.qxd 7/10/01 4:40 PM Page 4