Installation of Kebab MkII system
23
Remove the Kebab MkII L system from UJF-6042MkIIseries
When you draw the work with different diameter from the one you drew until then, it may be required to remove
Kebab MkII L system once and reattach it on the table depending on the diameter.
When removing Kebab MkII L system, follow the procedures below:
1
Turn OFF the main power of the printer main unit.
2
Open the front cover.
3
Remove the clamp fixing the option
relay cable
4
Remove the option relay cable from the
printer main unit.
5
Remove the option relay cable from the
rear surface of Kebab MkII system.
6
Remove the plastic knob screw fixing
Kebab MkII L and remove Kebab MkII L
system.
Option relay cable
Clamp
Option relay cable
Option relay cable