MIMAKI JV5-320DS Operation Manual Download Page 25

Page: 25 / 140

2-13

Operation to set function menus

MAINTENANCE functions

For functions that are not explained in detail in this manual, related items are

indicated in gray.

Function name

Sub function

Setting value

Function

ST.MAINTE-
NANCE

Refer to the Chapter
4 of the JV5-320S
Operation Manual.

CARRIAGE OUT
(Can be selected directly by pressing
[ST.MAINT] key.)

Move the carriage when cleaning the
inside of the station and replacing
consumables.

Do not move the carriage out of the
capping station by hand. Select the
[ST.MAINTENANCE] - [CAR-
RIAGE OUT] to move the carriage.

WIPER EXCHANGE
(Can be selected directly by pressing
[ST.MAINT] key.)

When the display shows that the
wipers must be replaced, perform
this operation and replace the wip-
ers.

NOZZLE WASH
(Can be selected directly by pressing
[ST.MAINT] key.)

Washes the nozzles with a cleaning
kit to correct nozzle clogging and jet
deviation.

DISWAY WASH
(Can be selected directly by pressing
[ST.MAINT] key.)

Washes the ink discharge passages
(pump tubes) to prevent their clog-
ging.

CUSTODY WASH
(Can be selected directly by pressing
[ST.MAINT] key.)

When the operation of the printer is
to be suspended for more than one
week, wash the nozzles in the heads
and ink discharge passages and
make arrangements for storage.

PUMP TUBE WASH
(Can be selected directly by pressing
[ST.MAINT] key.)

Washes the wiper.

WIPER WASH
(Can be selected directly by pressing
[ST.MAINT] key.)

Washes the ink suction pumps.

Sub-INK MAINTE.
(Refer to P. 4-8 in this manual.)
(Can be selected directly by pressing
[ST.MAINT] key.)

Perform this when you wish to clean
the ink tray on the flushing BOX or
replace the filter.

CR.MAINTENANCE

Refer to the Chapter 4 of the JV5-320S Operation Manual.

Move the head unit to the left end of
the printer and perform maintenance
of the heads and related parts.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV5-320DS













































































































































Search results

Summary of Contents for JV5-320DS

Reviews:

Related manuals for JV5-320DS

Brands by name

Popular brands

MIMAKI JV5-320DS, Operation Manual

Search results

Summary of Contents for JV5-320DS

Reviews:

Related manuals for JV5-320DS

Brands by name

Popular brands