14
MW806
Portable Meter
7. SETUP
7.1. MEASUREMENT MODES
Setup options and calibration depend on the selected measurement
mode.
Press RANGE/
from the measurement screen to select:
y
PH, to enter pH mode
y
CONDUCTIVITy or TDS, to enter EC mode
ºC
ATC
12.45
10.01
7.01
4.01
1.68
CAL
pH
MEASURE
24.3
H
9.97
P
ºC
ATC
mS/cm
MEASURE
29.0
T I V I T Y
14.83
C O N D U C
ºC
ATC
g/L
MEASURE
25.0
S
6.95
T D
Measurement Mode
Setup Mode
Measurement Unit
PH
PH (default)
pH
CONDUCTIVITy
EC
mS/cm
TDS
EC
g/L
Note: At power on, the meter starts in the previously selected
measurement mode.
To configure the meter settings, modify default values, or set
measurement parameters:
y
Press RANGE/
to select measurement mode.
y
Press SETUP to enter (or exit) Setup mode.
y
Use
keys to navigate the menus (view parameters).
y
Press CAL/EDIT to enter Edit mode (modify parameters).
y
Press RANGE/
key to select between parameter options.
Use
keys to modify values (value being modified is
displayed blinking).
y
Press GLP/ACCEPT to confirm and save changes (ACCEPT tag
is displayed blinking).
y
Press ESC (or CAL/EDIT again) to exit Edit mode without
saving (return to menu).
