18
MW180 pH / mV / EC / TDS / NaCl / Temperature Bench Meter
7. SETUP
7.1. MEASUREMENT MODES
MW180
can switch between measurement modes from the measurement screen.
Available options for setup, calibration and measurement will depend on selected mode.
y
Press RANGE/
from the measurement screen
y
Select PH or ORP to enter pH mode
y
Select CONDUCTIVITY, TDS, SALINITY to enter EC mode
Measurement Mode
Setup Mode
Measurements
PH
pH
pH
ORP
mV
CONDUCTIVITY
EC
EC
TDS
TDS
SALINITY
%NaCl
To configure the meter settings, modify default values or set measurement parameters:
y
Press RANGE/
to select a measurement mode
y
Press SETUP to enter (or exit) Setup mode
y
Use
keys to navigate the menus (view parameters)
y
Press CAL/EDIT to enter Edit mode (modify parameters)
y
Press RANGE/
key to select between options
Use
keys to modify values (value being modified is displayed blinking)
y
Press GLP/ACCEPT to confirm and save changes (ACCEPT tag is displayed blinking)
y
Press ESC (or CAL/EDIT again) to exit Edit mode without saving (return to menu)
