34
MW170 Bench Meter
10. LOGGING
MW170
supports three types of logging: manual log on demand, log on stability and interval
logging. See Log Type in SETUP OPTIONS section.
The meter can hold up to 1000 log records. Up to 200 for manual log on demand, up to 200
for log on stability and up to 1000 for interval logging. See DATA MANAGEMENT section.
Note: An interval logging lot can hold up to 600 records. When an interval logging
session exceeds 600 records, another log file is automatically generated.
10.1. TYPES OF LOGGING
Manual log on demand
y
Readings are logged each time LOG/CLEAR is pressed
y
All manual readings are stored in a single lot (i.e. records made on different days
share the same lot)
Log on stability
y
Readings are logged each time LOG/CLEAR is pressed and stability criteria is reached
y
Stability criteria can be set to fast, medium or accurate
y
All stability readings are stored in a single lot (i.e. records made on different days
are logged in the same lot)
Interval logging
y
Readings are logged continuously at a set time interval (e.g. every 5 or 10 minutes).
y
Records are added to it until the session stops.
y
For each interval logging session, a new lot is created.
A complete set of GLP information including date, time, range selection, temperature
reading and calibration information is stored with each log.