www.milwaukee
inst.com
39
• xx=06 EC range
• xx=07 TDS range
• xx=08 NaCl range
The instrument will answer for this command with:
<STX> <answer
>
<ETX>
where:
<STX> is 02 ASCII code character (start of text)
<ETX> is 03 ASCII code character (end of text)
<answer>:
<ACK> is sent for a recognized command
<CAN> is sent when the instrument is logging
<Err6>/<Err8> is sent when the command is incorrect or the instrument is not in
measurement mode.
COMMANDS REQUIRING AN ANSWER
COMMANDS REQUIRING AN ANSWER
COMMANDS REQUIRING AN ANSWER
COMMANDS REQUIRING AN ANSWER
COMMANDS REQUIRING AN ANSWER
The instrument will answer for these commands with:
<STX> <answer> <checksum> <ETX>
where the checksum is the bytes sum of the answer string sent as 2 ASCII characters.
All the answer messages are with ASCII characters.
RPH
RPH
RPH
RPH
RPH
Causes the instrument to send a complete set of readings in according with the pH
range.
RMV
RMV
RMV
RMV
RMV
Causes the instrument to send a complete set of readings in according with the mV /
Rel mV range.
REC
REC
REC
REC
REC
Causes the instrument to send a complete set of readings in according with the EC range.
RTD
RTD
RTD
RTD
RTD
Causes the instrument to send a complete set of readings in according with the TDS range.
RNC
RNC
RNC
RNC
RNC
Causes the instrument to send a complete set of readings in according with the NaCl
range.
MDL
MDL
MDL
MDL
MDL
Requests the instrument model name and firmware code (16 ASCII chars).
INF
INF
INF
INF
INF
Requests the calibration data and the setup parameters.
SAM
SAM
SAM
SAM
SAM
Requests the number of logged samples (20 chars).
LDPH
LDPH
LDPH
LDPH
LDPH
Requests the xxx
th
pH record logged data.
LDMV
LDMV
LDMV
LDMV
LDMV
Requests the xxx
th
mV/Rel mV record logged data.
L D E C
L D E C
L D E C
L D E C
L D E C
Requests the xxx
th
EC record logged data.
LDTD
LDTD
LDTD
LDTD
LDTD
Requests the xxx
th
TDS record logged data.
L D N C
L D N C
L D N C
L D N C
L D N C
Requests the xxx
th
NaCl record logged data.
LAPH
LAPH
LAPH
LAPH
LAPH
Requests all pH Log on demand.
