14
MW160
Bench Meter
6. GENERAL OPERATIONS
6.1. POWER CONNECTION & BATTERY MANAGEMENT
MW160
can be powered from the supplied 12 VDC adapter. The auto-off feature turns the
meter off after 20 minutes of non-use.
At power on the instrument performs an auto-diagnostic test. All LCD segments are
displayed for a few seconds.
The instrument starts with the previously selected measurement range. The OPEN tag
and the “ ”, “ ” symbols are displayed blinking for a few seconds to remind the user
to unscrew the electrode refilling cap and to remove the protective cap before taking
measurements.
6.2. MOUNTING THE ELECTRODE HOLDER
y
Take the
MA9315
electrode holder from the box.
y
Identify the metal plate (4) with the integrated pin (5) and the screw (2).
The plate may be attached to either sides of the meter, left (L) or right (R).
y
Turn the meter over, with the display facing down.
1
2
3
4
5
6L
6R
R
L
y
Align the rubber foot (6R or 6L) with the hole (3) on the plate (4). Make sure the pin (5)
is facing down.
y
Use a screwdriver (1) to tighten the screw (2) and lock in place.
