background image

2

3

IMPORTANT SAFETY INSTRUCTIONS

WARNING

READ AND UNDERSTAND 

ALL INSTRUCTIONS.

 

Failure to 

follow all instructions listed below, may result in 

electric shock, fire and/or serious personal injury.

WORK AREA SAFETY

• Keep work area clean and well lit.

 Cluttered or 

dark areas invite accidents.

ELECTRICAL SAFETY

• Do not expose heated gear to rain or wet condi-

tions. 

Water will increase the risk of electric shock.

• Do not abuse the power cable. Never use the cord 

for carrying, pulling or unplugging the heated 

gear. Keep cord away from heat, oil, sharp edges 

or moving parts.

 

PERSONAL SAFETY

• Stay alert, watch what you are doing and use 

common sense when using the heated gear. Do 

not use while you are tired or under the influ

-

ence of drugs, alcohol or medication. 

A moment 

of inattention may result in serious personal injury.

POWER TOOL USE AND CARE

• Do not use the heated gear if the power button 

does not turn it on and off.

 Any heated 

gear

 that 

cannot be controlled with the power button is dan

-

gerous and must be repaired.

• Disconnect the battery pack from the heated gear 

before storing. 

Such preventive safety measures re

-

duce the risk of starting the heated gear accidentally.

• Store out of the reach of children and do not al-

low persons unfamiliar with these instructions 

to operate the heated gear.

 Heated gear can be 

dangerous in the hands of untrained users.

• Maintain  heated  gear.  Check  for  breakage  of 

parts and any other condition that may affect 

the heated gear’s operation. If damaged, have 

the heated gear repaired before use. 

• Use the heated gear in accordance with these 

instructions, taking into account the working 

conditions and the work to be performed. 

Use of 

the heated gear for operations different from those 

intended could result in a hazardous situation.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the 

manufacturer. 

A charger that is suitable for one type 

of battery pack may create a risk of fire when used 

with another battery pack.

• Use  heated  gear  only  with  specifically  desig

-

nated  battery  packs. 

Use of any other battery 

packs may create a risk of injury and fire.

• When battery pack is not in use, keep it away 

from other metal objects like paper clips, coins, 

keys, nails, screws, or other small metal objects 

that can make a connection from one terminal 

to another. 

Shorting the battery terminals together 

may cause burns or a fire.

• Under abusive conditions, liquid may be ejected 

from the battery; avoid contact. If contact acci

-

dentally occurs, flush with water. If liquid con

-

tacts eyes, additionally seek medical help. 

Liquid 

ejected from the battery may cause irritation or burns.

SERVICE

• Have your heated gear serviced by a qualified 

repair person using only identical replacement 

parts. 

This will ensure that the safety of the heated 

gear is maintained.

SPECIFIC SAFETY RULES FOR 

HEATED GEAR

Read instructions carefully.

Use:

• Do not use this heated gear with an infant, child, 

a helpless person, or anyone insensitive to heat, 

such  as  a  person  with  poor  blood  circulation.

• If you have a medical condition making you sensi

-

tive to overheating, or you use any personal medi

-

cal devices

, consult the devise manufacturer and/or 

your physician to determine if use of this product is 

appropriate.

• Never use if inner liner is wet.

• Heating elements are not recommended to touch 

bare skin.

• Shut off power immediately if discomfort occurs.

• Do not allow the cords to be pinched.

• If improper operation of this heated gear is 

observed, discontinue its use immediately

 and 

contact a

 

MILWAUKEE service facility for repair.

• Do not use pins

. They may damage the electric wiring.

Care:

• Before washing, disconnect and remove battery 

pack and battery controller from battery pocket. 

Push the power cord completely into the battery 

controller pocket and zip all pockets closed.

• Follow Care Instructions on gear tags. Machine 

wash, Gentle Cycle in warm water. Tumble Dry 

Low Heat.

• Do not bleach.

• Do not iron.

• Do not wring or twist.

• Do not dry clean. 

Do not use dry-cleaning fluid on 

this heated gear. Do not bleach. Cleaning solvents 

may have a deteriorating effect on the insulation of 

the heating element.

• Always use common sense and be cautious when 

using tools. 

It  is  not  possible  to  anticipate  every 

situation that could result in a dangerous outcome. 

Do not use this tool if you do not understand these 

operating instructions or you feel the work is beyond 

your capability; contact Milwaukee Tool or a trained 

professional for additional information or training.

 

Maintain  labels  and  nameplates. 

These carry 

important information. If unreadable or missing, contact 

a MILWAUKEE service facility for a free replacement.

SYMBOLOGY

 

   Volts

 

  Direct Current

 

  Machine wash, gentle cycle in warm water

 

  Do not bleach

 

  Do not wring or twist

 

  Tumble dry, low heat

 

  Do not iron

 

  Do not dry-clean

SPECIFICATIONS

Cat. No. .................................................304 Series

43-72-1000 

Volts

..............................................................

12 DC

Battery Type .................................................

M12™

Charger Type................................................

M12™

FUNCTIONAL DESCRIPTION

2

4

1

2

3

1. Power button 

2. Battery controller 

Back

3. Power cable port

4. Battery controller pocket

ASSEMBLY

WARNING

Recharge only with the charger 

specified for the battery. For spe

-

cific charging instructions, read the operator’s 

manual supplied with your charger and battery.

Inserting/Removing the Battery

To 

insert 

the battery, slide the pack into the body of 

the battery controller. Make sure it latches securely 

into place. 

Insert the power cable (from inside the pocket) into 

the power cable port on the battery controller. 

Push  the  power  cable  completely  into  the  battery 

controller pocket and zip all pockets closed.

To 

remove

 the battery, push in the release buttons 

and pull the battery pack away from the controller.

OPERATION

To 

turn on

, press and hold (about 2 seconds) the 

power button. The zone will be turned to High and 

the LED will light.

Temperature setting can be 

adjusted

 at any time 

by pressing the power button. Each press will cycle 

through the temperature settings. 

To

 turn off

, press and hold (about 2 seconds) the 

power button. The LED will turn off.  

If  the  heated  gear  turns  off  unexpectedly,  check 

connections  and  charge  the  battery  pack.  Battery 

controller is located inside of the pocket.

CARE

WARNING

To reduce the risk of injury, always 

unplug the charger and remove the 

battery  pack  and  battery  controller  from  the 

heated gear before performing any maintenance. 

Never disassemble the heated gear, battery pack 

or charger. Contact a MILWAUKEE service facil

-

ity for ALL repairs.

If the heated gear does not start or operate properly 

with a fully charged battery pack, clean the contacts on 

the battery pack. If the heated gear still does not work 

properly, return the heated gear, charger and battery 

pack, to a MILWAUKEE service facility for repairs.

WARNING

To reduce the risk of personal in-

jury and damage, disconnect and 

remove battery pack and battery controller from 

battery holder pocket before washing. Never im

-

merse your battery holder, battery pack, or char

-

ger in liquid or allow a liquid to flow inside them.

To clean the heated gear:

1. Remove battery pack and battery controller.

2. Push the power cord completely into the battery 

controller  pocket  and  fasten  closed.  Zip  center 

front zipper closed before washing.

3. Machine wash, Gentle Cycle in warm water. Do 

not use bleach. Do not dry clean. Do not wring or 

twist.

4. Tumble Dry on Low Heat. Do not iron.

ACCESSORIES

WARNING

Use only recommended accesso-

ries. Others may be hazardous.

For a complete listing of accessories, go online to 

www.milwaukeetool.com or contact a distributor.

SERVICE - UNITED STATES

1-800-SAWDUST

 

(1.800.729.3878)

Monday-Friday, 7:00 AM - 6:30 PM CST

or visit 

www.milwaukeetool.com

Contact  Corporate  After  Sales  Service  Technical 

Support  with  technical,  service/repair,  or  warranty 

questions. 

Email: [email protected]

Become a Heavy Duty Club Member at 

www.milwaukeetool.com  to  receive  important 

notifications regarding your tool purchases. 

SERVICE - CANADA

Milwaukee Tool (Canada) Ltd 

1.800.268.4015

Monday-Friday, 7:00 AM - 4:30 PM CST

or visit 

www.milwaukeetool.ca

LIMITED  WARRANTY                     

USA & CANADA

Every MILWAUKEE HEATED GEAR product (including its battery holder/

controller) is warranted to the original purchaser only to be free from defects 

in material and workmanship. Subject to certain exceptions, MILWAUKEE 

will  repair  or  replace  any  part  on  a  Heated  Gear  product  which,  after 

examination, is determined by MILWAUKEE to be defective in material or 

workmanship for a period of one (1) year* after the date of purchase. Return 

of a Heated Gear product to a MILWAUKEE factory Service Center location, 

freight prepaid and insured, is required. A copy of the proof of purchase 

should be included with the return product. This warranty does not apply to 

damage that MILWAUKEE determines to be from repairs made or attempted 

by anyone other than MILWAUKEE personnel, misuse, alterations, abuse, 

normal wear and tear, or accidents.

*This warranty does not cover a M12™ LITHIUM-ION Battery Pack, a M12™ 

Charger, or a REDLITHIUM™ USB battery; there are separate and distinct 

warranties available for these products.

Warranty Registration is not necessary to obtain the applicable warranty on 

MILWAUKEE Heated Gear products. The manufacturing date of the product 

will be used to determine the warranty period if no proof of purchase is 

provided at the time warranty service is requested.

ACCEPTANCE  OF  THE  EXCLUSIVE  REPAIR AND  REPLACEMENT 

REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT 

FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO 

NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE 

PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY 

INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, 

OR  FOR ANY  COSTS, ATTORNEY  FEES,  EXPENSES,  LOSSES  OR 

DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, 

FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT 

LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES 

DO  NOT ALLOW THE  EXCLUSION  OR  LIMITATION  OF  INCIDENTAL 

OR  CONSEQUENTIAL  DAMAGES,  SO THE ABOVE  LIMITATION  OR 

EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE 

AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR 

ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS 

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY 

Summary of Contents for M12 HEATED TOUGHSHELL VEST 304 Series






Reviews: