3
•
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another.
Shorting the battery terminals together
may cause burns or a fire.
•
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac
-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
•
Do not use a battery pack or tool that is dam
-
aged or modified.
Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
•
Do not expose a battery pack or tool to fire or
excessive temperature.
Exposure to fire or tem
-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specified range may damage the battery and
increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs.
Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
IMPACT WRENCH/IMPACT DRIVER
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring.
Fasteners con-
tacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator
an electric shock.
•
Wear ear protectors.
Exposure to noise can
cause hearing loss.
• Use only sockets and other accessories spe-
cifically designed for use on impact wrenches
and drivers.
Other sockets and accessories might
shatter or break causing injury.
• Keep hands away from all cutting edges and
moving parts
.
•
WARNING
To reduce the risk of injury in ap-
plications that produce a consid-
erable amount of dust, use an OSHA compliant
dust extraction solution in accordance with the
solution’s operating instructions.
• Always use common sense and be cautious when
using tools.
It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
•
Maintain labels and nameplates.
These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sand-
ing, sawing, grinding, drilling, and
other construction activities contains chemicals
known to cause cancer, birth defects or other repro-
ductive harm. Some examples of these chemicals
are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to filter out microscopic particles.
SPECIFICATIONS
Volts
..............................................................
12 DC
RPM
.............................................................
0-2500
Battery Type
.................................................
M12™
Charger Type
................................................
M12™
Recommended Ambient
Operating Temperature
......................
0°F to 125°F
Cat. No. ..................................................... 2461-20
Drive Shank
..........................................1/4" Square
IPM
..............................................................
0-3800
Cat. No. ..................................................... 2462-20
Drive Shank
...............................................1/4" Hex
IPM
..............................................................
0-3300
Cat. No. ..................................................... 2463-20
Drive Shank
..........................................3/8" Square
IPM
..............................................................
0-3300
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
C
US
UL Listing for
Canada and U.S.
FUNCTIONAL DESCRIPTION
1. Trigger
2. Control switch
3. LED
4. Drive Shank
5. Fuel Gauge
6. Handle
7. 1/4" Square drive
8. 3/8" Square drive
Cat. No.
2461-20
7
Cat. No.
2463-20
8
Cat. No.
2462-20
5
4
3
2
1
6
