5
funcTional descripTion
1. Auxiliary handle
2. Motor housing
3. Trigger switch
4. Lower guard lever
5. Lower guard
4
2
1
3
5
10
7
6
8
9
11
12
13
14
15
16
18
17
6. Blade bolt
7. Outer flange
8. Rip fence slot
9. Sighting notches
10. Shoe
11. 60˚ Override button
12. Miter scale
13. Miter adjusting lever
14. Spindle lock button
15. Upper guard
16. Depth of cut scale
17. Depth adjusting lever
18. Wrench storage
Cat. No.
Volts
AC Amps
No Load
RPM
Blade
Size Arbor
Max Cutting
Depth at 90˚
Max Cutting
Depth at 45˚
Max Cutting
Depth at 60˚
6470-21
120
15
5200
10¼" 5/8"
0 to 3-13/16"
0 to 2-3/4"
0 to 1-3/4"
specificaTions
symbology
assembly
Selecting Blade
Select a blade appropriate for your application.
Refer to the “Accessories” section for a list of blades
to be used for the proper applications of this tool.
Always use sharp blades. Dull blades tend to
overload the tool and increase the chance of KICK-
BACK. Only use thin kerf blades with a maximum
safe operating speed greater than the no load RPM
marked on the tool's nameplate. Read the blade
manufacturer's instructions before use. Do not use
any type of abrasive cut-off wheel or dry diamond
cutting blades. Use the correct blade type for your
application. Using the wrong blade may result in
reduced performance or damage to the blade. Do
not use blades that are cracked or have broken
teeth. Do not sharpen ferrous metal cutting blades;
see the blade manufacturer's recommendations
regarding sharpening.
Warning
To reduce the risk of injury,
always unplug tool before changing or remov-
ing accessories. Only use accessories specifi-
cally recommended for this tool. Others may
be hazardous.
Warning
Only use accessories with
maximum speed rating at least as high as
nameplate RPM of tool.
Double Insulated
Amps
Volts
No Load Revolutions per Minute
(RPM)
Alternating Current
Underwriters Laboratories, Inc.
United States and Canada
C
US
