background image

12

13

ACCESSORIES

WARNING!

To reduce the risk of injury, always unplug the tool
before attaching or removing accessories. Use
only specifically recommended accessories. Oth-
ers may be hazardous.

Sanding Pads

Cat. No. 49-36-7030
5" Standard sanding pad suitable for gen-
eral sanding in most applications.

Cat. No. 49-36-7040
6" Standard sanding pad suitable for gen-
eral sanding in most applications.

Sandpaper  discs - 10 packs

Sandpaper discs are available in a variety of grits and sizes, as follows:

Cat.

No.

48-80-1000
48-80-1005
48-80-1010
48-80-1015
48-80-1020
48-80-1025

48-80-1030

48-80-1100
48-80-1105

48-80-1110
48-80-1115

48-80-1120
48-80-1125

48-80-1130

Sander

Size

5"

6"

Grit

80

100
120
150
180
220

80

100
120
150
180
220

Assortment  pack contains

(2) of each of the  above.

Assortment  pack contains

(2) of each of the  above.

Sandpaper  discs - 50 packs rolls

Sandpaper discs are available in convenient, economical 50-pack rolls, as follows:

Cat.

No.

48-80-1035
48-80-1040
48-80-1045
48-80-1050
48-80-1055
48-80-1060

48-80-1135
48-80-1140
48-80-1145
48-80-1150
48-80-1155
48-80-1160

Sander

Size

5"

6"

Grit

80

100
120
150
180
220

80

100
120
150
180
220

For a complete listing of accessories refer to your

 MILWAUKEE Electric Tool catalog or go

on-line to www.mil-electric-tool.com. To obtain a catalog, contact your local distributor or
a service center listed on the back cover of this operator’s manual.

FIVE YEAR TOOL LIMITED WARRANTY

Every 

MILWAUKEE tool is tested before leaving the factory and is warranted to be free

from defects in material and workmanship. 

MILWAUKEE will repair or replace (at

MILWAUKEE’s discretion), without charge, any tool (including battery chargers) which
examination proves to be defective in material or workmanship from five (5) years after
the date of purchase. Return the tool and a copy of the purchase receipt or other proof of
purchase to a 

MILWAUKEE Factory Service/Sales Support Branch location or MILWAUKEE

Authorized Service Station, freight prepaid and insured. This warranty does not cover
damage from repairs made or attempted by other than 

MILWAUKEE authorized personnel,

abuse, normal wear and tear, lack of maintenance, or accidents.

Battery Packs, Flashlights, and Radios are warranted for one (1) year from the date of
purchase.

THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE EXCLUSIVE. IN NO
EVENT SHALL 

MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSE-

QUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, OR CONDI-
TIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR MERCHANTABLILITY OR FITNESS
FOR PARTICULAR USE OR PURPOSE.

This warranty gives you specific legal rights. You may also have other rights that vary
from state to state and province to province. In those states that do not allow the exclusion
of implied warranties or limitation of incidental or consequential damages, the above
limitations or exclusions may not apply to you. This warranty applies to the United States,
Canada, and Mexico only.

Summary of Contents for 6125






















Reviews: