![background image](http://html1.mh-extra.com/html/milwaukee/4939-5258-01/4939-5258-01_manual_1799201010.webp)
10
PAGE
4939 5258 01
Maintenance
General
It is recommended that maintenance be performed on the machine at regular intervals or when the car-
bon brushes switch off at the latest.
Cleaning
Clean all parts – with the exception of the electrical parts – with cold cleaning agent. Caution! No clean-
ing agent should penetrate into the bearing. Clean the electrical parts with a dry brush.
Check for wear
Check the disassembled parts for wear (visual inspection) and replace worn parts.
Electrical tests
Before reassembling, perform an electrical test on all relevant parts (see chapter Electrical and Me-
chanical Test Instructions).
Lubrication
Each time maintenance is performed, the machine is to be lubricates as stated in the lubrication plan.
After the machine is fully disassembled, completely remove the old grease and replace with new
grease. The grease must be applied to the machine as indicated in the lubrication plan.
The service set no. 4931 375 659 contains all listed spare parts.
120 g A
20 g A
35 g B
80 g A
20 g A
approx.
48 g A
A
B
35 g B
10 g B
2 g B
A
10 g B
2 g B
A
A
B
A
A
daub
thinly
daub
thinly
daub
thinly
daub
thinly
daub
thinly
daub
thinly
1 g A
1 g A
approx.
48 g A
1 g A
1 g A
3 g B
3 g B
The illustration shows the spindle sleeve
used from date of manufacture 07/2004.
The illustration shows the spindle sleeve
used from date of manufacture 07/2004.
Lubrication chart: Chisel hammer
A: Fill res. daub with a total of 190 g grease type Darina
(order no.: 215 922, 100-g-tube).
B: Fill res. daub with 50 g grease type Urethyn
(order no.: 4931 6243 75, 45-g-tube).
Lubrication chart: Combined
drill/chisel hammer
A: Fill res. daub with a total of 150 g grease type Darina
(order no.: 215 922, 100-g-tube).
B: Fill res. daub with 50 g grease type Urethyn
(order no.: 4931 6243 75, 45-g-tube).