background image

SPECIFICATIONS 

 
All specifications are warranted unless noted typical and apply to the 2266-20 Laser TEMP-GUN™

Thermometer.

Stated accuracies are at 23°C±5°C at than 80% relative humidity and without the battery 
indicator displayed. 
 

General specifications 

 

Laser Type:

   

 

 

Class II

Max Power:

   

 

 

<1mW

Wavelength:

   

 

 

630-670 nm

IR Temperature range: 

 

-30°C to 500°C (-22°F to 932°F)

IR Accuracy:   

 

 

-30°C to 10°C (-22°F to 50°F): ±1.5°C (3°F)

 

 

 

 

 

10°C to 30°C (50°F to 86°F): ±1.0°C (2°F)

 

 

 

 

 

30°C to 380°C (86°F to 716°F): ±1.5°C (3°F)

 

 

 

 

 

or 1.5% of reading, whichever is greater

 

 

 

 

 

380°C to 500°C (716°F to 932°F): ±2°C (4°F)

 

 

 

 

 

or 2% of reading, whichever is greater

 

 

 

 

 

*Assume ambient operating temperature of

 

 

 

 

 

23°C to 25°C (73°F to 77°F)

Min. measuring distance: 

 

2” < 50°C (122°F),

 

 

 

 

 

4” > 50°C (122°F)

Display resolution:   

 

0.1°C (0.1°F)

Contact temperature range:   

-30°C to 450°C (-22°F to 842°F)

Contact temperature input accuracy: 

± 1.1°C (± 2°F)

Temperature display resolution: 

0.1°C/°F in Primary, 1°C/°F in Secondary

Emissivity: 

 

 

 

0.95

Response time: 

 

 

<500 msec

Spectral response:   

 

8 to 14μm

Distance to spot: 

 

 

12 to 1

Drop:   

 

 

 

1.5 meter

Repeatability:   

 

 

±0.5% OR ±1°C(±2°F)

 

 

 

 

 

(whichever is greater)

Operating temperature: 

 

0°c to 50°C (32°F to 122°F)

Storage temperature:   

 

-20°C to 60°C (-4°F to 140°F)

 

 

 

 

 

w/o battery

Relative humidity: 

 

 

10 to 90% RH non-condensing at <30°C ambient

Voltage: 

 

 

 

4.5 DC

Battery life:   

 

 

Greater than 12 hrs with all functions

 

  

   

  

      

  

 

  

 

Summary of Contents for 2266-20 Laser TEMP-GUN










Reviews: