Miltenyi Biotec UltraMicroscope II, User Manual

Page: 25 / 58

4
SW
IT
C
H
IN
G
O
N
A
N
D
O
FF
23
4
Operation
4.1 Switching on the instrument
1 Ensure that all components are connected to the power supply.
2 Switch on the external laser module. The key switch is located on the laser module, refer to manufacturer
documentation.
3 Switch on the instrument. The power switch is located on the right-hand side of the instrument, refer to
Instrument description on page 14 .
4 Switch on the camera.
5 Switch on the workstation PC and log on to the Windows system with your user credentials.
6 Start the ImSpector software by double-clicking the program icon. The switched on devices are registered
and checked.
4.2 Switching off the instrument
1 Close the ImSpector software.
2 Shut down the Windows system.
3 Switch off the camera.
4 Switch off the instrument.
5 Switch off the external laser module.
4.3 Graphical user interface
Name Function Location
Start measurement Starts the defined measurement Toolbar
Stop measurement Stops the defined measurement Toolbar
Save settings Saves all settings Toolbar
Start measurement Starts the defined measurement Measurement Wizard
Start live preview Starts a preview in the live window Measurement Wizard
Adjust window/level Adjusts the contrast based on the
region of interest in the live window Live window
ROI for active profile Defines a region of interest in the live
window Live window