Milnor MilTouch MWB26Z, Operator'S Manual

Page: 17 / 38

Pellerin Milnor Corporation
15
where the batch weight is as close as possible to the recommended load size for the type of
goods.
Ex. The recommended load size is 100 kg. If the batch weight is 98 kg, and there are 3
pockets:
98/3 = 32.67
Therefore each pocket should hold approximately 32.67 kg.
3. Load the machine.
• If your machine is a divided-cylinder machine, load the first pocket.
• If your machine is an open-pocket machine, load the cylinder.
BNWUUO04 / 2020403
BNWUUO04 0000279498 A.18 9/29/20 9:53 AM Released
3.7 Close the inner door.
BNWVUO01.T02 0000254675 E.3 A.18 C.3 9/2/20 11:52 AM Released
1. Push the door to the closed position.
2. Push the lever (item C in Figure 6: Inner
(Cylinder) Door Lock Mechanism, page 11 )
to the locked position until it clicks, as
shown.
3. Pull the handle in your direction to test the
lock. If the door does not open, it is fully
closed and locked.
3.8 Close the outer door.
BNWUUO04.T02 0000289837 E.3 A.18 A.12 9/22/20 11:42 AM Released
To close the door, swing it closed with sufficient force to latch it.
BNWVUO05 / 2020512
BNWVUO05 0000289691 C.2 12/14/20 12:01 PM Released
3.9 Align and load the second pocket, or the second
and third pockets.
BNWVUO05.C01 0000306806 E.3 C.2 12/10/20 4:46 PM Released
If your machine is a divided-cylinder machine, use the following instructions to load the second
pocket and (if your machine is a three-pocket machine) third pocket. The procedure is different
depending on the method you use to weigh goods.
If your machine is an open-pocket machine (not a divided-cylinder machine), go to Section 3.10 :
Start the wash formula., page 18 .
Normal Operation