6
Pellerin Milnor Corporation
Clean-Side Controls
Clean-side buzzer (H2)
— This buzzer (item B in
) sounds at the end of a formula
while the cylinder turns to the clean-side position (the discharge position).
Clean-side light
(H3)
— This light (item C in
) illuminates to indicate the clean-
side door is unlocked and the machine is ready to be unloaded.
Reposition button
(S4)
— This button (item D in
) rotates the drum (cylinder)
to the clean-side position, or rotates the drum to the next pocket on the clean side if the drum is
already on the clean side. This button can be used to align the inner and outer doors if they are
misaligned.
Control on soil side button
(S5)
— This button (item E in
) rotates the drum
(cylinder) to the soil-side position.
BNVLUO01 / 2018513
BNVLUO01
0000189558
B.4
1/2/20 2:17 PM
Released
2.2
Emergency Stop Switch (locking push button)
BNVLUO01.C01 0000189557 E.3 B.4 F.2 12/9/20 9:19 AM Released
One or more
emergency stop
switches (pictured below) may be provided on the device. When
pressed, any
emergency stop
switch removes power from the machine controls, stops the ma-
chine, and locks in the depressed (switch actuated, machine stopped) position. When safe to do
so, turn the button clockwise to unlock the switch. To resume operation, perform the device’s nor-
mal startup procedure.
Figure 4.
Emergency Stop Switch
Stopped Position
Run Position
NOTICE:
Press the
emergency stop
switch immediately in an emergency situation.
Display or Action
Explanation
This symbol represents the
emergency stop
switch in Milnor
®
documents other than electrical wiring diagrams.
Summary of Contents for MilTouch MWB26Z
Page 2: ......
