Milnor 30022H8J Service Download Page 18 | Manualshive

Page: 18 / 85

Milnor 30022H8J Service Download Page 18

PELLERIN MILNOR CORPORATION

Display or Action

Explanation

B2T2001013: Hot water connection.

B2T2001014: Cold water connection.

B2T2001015: Reuse (third) water connection (optional).

B2T2001028: Look for tags inside the machine. These tags may
identify shipping restraints to be removed or components to be
installed. Do not start the machine until these actions are
completed.

B2T2002013: Do not start the machine until shipping restraints
are removed. This tag will appear on the outside of the machine
to alert you to the presence of internal shipping restraints. A tag
will also appear on the restraint to help identify it. Most, but not
all shipping restraints display the color red. Some shipping
restraints are also safety stands. Do not discard these.

B2T2003001: Hold the side of the connection stationary with a
wrench as you tighten the connection with another wrench.
Otherwise, you may twist components, such as valves, damaging
them.

B2T2003002 or 01-10710A: CAUTION: Equipment and Textile
Damage Hazards—Chemicals leaked into the machine,
particularly when it is idle, can destroy machine components and
textiles left in the machine.
Ensure the chemical system prevents dribbling, siphoning, or any
other unintentional release of chemicals.
Inspect regularly for proper operation and evidence of damage.
Consult Milnor document BIWUUI03 “Avoiding Damage from
Allied Remote Chemical Delivery Systems”.

«
...
16
17
18
19
20
...
»

Summary of Contents for 30022H8J






















































































Reviews:

No comments