18 of 32
As mentioned previously, the legs should be installed such that the two threaded holes are exposed (facing
up).
Gather the (4) foot plates, (4) leveling feet, and (8) 5/16x3/4
”
screws. Take note of the position of the
threaded holes, then secure the foot plates onto the end of the legs. Do this for all four legs. Then thread the
leveling feet down into the center hole of the foot plate.
Enlist a couple of helpers, such as neighbors who will be jealous of your MillRight CNC Mega V XXL and want to
buy one too, to assist you in flipping the frame assembly right-side-up. Once flipped over, your frame should
look like the picture. Don
’
t be concerned yet about adjusting the leveling feet.
