1
Congratulations!
Thank you for buying a Milli-Q
®
water purification system.
The Milli-Q
®
IX 7003/7005/7010/7015 water purification system produces pure water from a tap
water source. Installation of this product should be performed by a qualified service representative
with access to installation documentation.
This user manual is a guide to be followed during the normal operation and maintenance of a
Milli-Q
®
IX 7003/7005/7010/7015 water purification system. It is highly recommended to fully
read this manual and comprehend its contents before using the water purification system.
System identification
System
Catalogue number
Production
flow rate
Voltage
Frequency
Milli-Q
®
IX 7003
ZIX7003T0
3 L.h
-1
100-240 V
50-60 Hz
Milli-Q
®
IX 7005
ZIX7005T0
5 L.h
-1
100-240 V
50-60 Hz
Milli-Q
®
IX 7010
ZIX7010T0
10 L.h
-1
100-240 V
50-60 Hz
Milli-Q
®
IX 7015
ZIX7015T0
15 L.h
-1
100-240 V
50-60 Hz
Manufacturing site:
Millipore SAS, 67120 Molsheim, France
For more information on your Milli-Q
®
system, please call your local representative or visit
our website www.emdmillipore.com (North America) or www.merckmillipore.com (Rest of the
World).
Intended use
The Milli-Q
®
IX 7003/7005/7010/7015 system is intended to produce pure (type 2) water from
a tap water source primarily for use in research and quality control in a variety of laboratories
worldwide.
The product is designed to produce pure water with specific characteristics (refer to the
requirements and specifications section) when it leaves the E-POD
®
unit, provided that it is fed
with water quality within specifications and properly maintained as required by the supplier.
Merck KGaA, Darmstadt, Germany does not warrant the product for any specific application. It is up to
the user to determine if the quality of the water produced by the product matches their expectations,
fits with norms/legal requirements and to bear responsibility resulting from the usage of the water.
The product is not intended to produce: water for injection, water for dialysis, sterile water for
irrigation or injection, bacteriostatic water for injection, sterile purified water in containers, and
sterile water for injection in container or ingestion. The product is not intended to be used in
explosive environments according to ATEX Directive – equipment & protective systems intended
for use in potentially explosive atmospheres. In addition the product is not intended as a Medical
Device, including In-Vitro Devices.
INTRODUCTION