Maintenance
31
Depressurization
Two depressurization features are available: the production depressurization and the distribu-
tion depressurization. Both depressurization modes are not necessary during normal opera-
tion. Use them in case of water leak
to temporarily stop tank filling and all water processes.
Identify the source of the leak. Once fixed, don’t forget to leave the depressurization modes.
Production depressurization
The production depressurization is available by
selecting the
Depressurization
app.
Simply press
when
turns into
to keep using the system. This temporarily
stops production and all water processes. To
go back to tank full/tank filling, swipe down
from the top of the touchscreen (near “E-POD
1”) and press
.
Distribution depressurization
The distribution depressurization is also
available by selecting the
Depressurization
app.
Install the E-POD
®
unit near a sink and press
the dispenser wheel to depressurize the
system. Press the “Exit maintenance
”
button to pressurize the distribution.
