45
LEGAL INFORMATION & WARRANTY
It has always been Millipore SAS policy to continuously improve its products.
The information in this document is subject to change without notice and should not be construed
as a commitment by Millipore SAS. Millipore SAS assumes no responsibility for any errors that
might appear in this document. This user manual is believed to be complete and accurate at
the time of publication. In no event shall Millipore SAS be liable for incidental or consequential
damages in connection with or arising from the use of this user manual.
Product warranty and limitation of liability
The applicable warranty and limitation of liability for the products listed in this publication may
be found at
www.merckmillipore.com
or
www.emdmillipore.com
within the “Conditions of Sale”
applicable to your purchase transaction.
Copyright
© Millipore SAS 2020.
All rights reserved. This document or parts thereof may not be reproduced in any form without
the written permission of Millipore SAS.
The photographs illustrating the products are non-contractual.
Trademarks
New trademark names
The initial M, Millipore, Milli-Q, E-POD, ech
2
o, IPAK Gard, Millipak and Biopak are trademarks of
Merck KGaA, Darmstadt, Germany.
Millipore SAS is an affiliate of Merck KGaA, Darmstadt, Germany.
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other
countries.
All other trademarks are trademarks of their respective manufacturers.
The Life Science Business of Merck KGaA, Darmstadt, Germany operates as MilliporeSigma in
the US and Canada.
Safety information
Your Milli-Q
®
system should be operated according to the instructions in this user manual. In
particular, the hydraulic and electrical specifications should be followed and met. It is important
to use this equipment as specified in this manual; using this equipment in a different manner
may impair the safety precautions of the Milli-Q
®
system.
Never open the system, even when the power switch has been switched off. Hazardous voltage
is present. It is not sufficient to stop all power to system, the plug must be physically removed
from its power source. Installation and maintenance should only be done by a qualified person.
Appropriate personal protective equipment (PPE) must be worn and safe work practices must be
followed.
Document Reference:
UM_MILLI-Q_IX_7003_7005_7010_7015_User_Manual_EN
Revision:
V1.0
