OM-1500-16 Page 13
SECTION 4 − INSTALLATION
4-1.
Serial Number And Rating Label Location
The serial number and rating information for this product is located inside the cover. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.
4-2.
Important Information Regarding CE Products (Sold Within The EU)
A. Information On Electromagnetic Fields (EMF)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner’s Manuals for all components of the welding circuit for additional EMF exposure
information.
S
The EMF assessment on this equipment was conducted at 0.5 meter.
S
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
ce-emc 3 2011-09
4-3.
Specifications
Type of
Input
Power
Welding
Power
Source
Type
Wire Feed
*
Speed
Range
Wire
Diameter
Range
Input Welding
Circuit Rating
Max. Wire
Spool
Capacity
Overall
Dimensions
Weight
24 Volts AC
Single Phase
7 Amperes
50/60 Hz
Constant
Voltage (CV)
DC With
14-Pin And
Contactor
Control
50 to 700 ipm
(1.3 To 17.8
mpm)
.023 To 5/64 in.
(0.6 To 2 mm)
100 Volts,
400 Amperes,
60% Duty Cycle
14 lb (6.4 kg),
8 in. (203 mm)
Length: 18 in.
(457 mm)
Width: 7-1/4 in.
(184 mm)
Height: 12-3/4 in.
(324 mm)
22 lb
(10 kg)
*Rated Speed Range Per IEC - 60974-5
4-4.
Environmental Specifications
IP Rating
IP23
This equipment is designed for outdoor use. It may be stored, but is not intended to
be used for welding outside during precipitation unless sheltered.
IP23 2014−06
