Miller PipePro XC, Owner'S Manual

Page: 34 / 72

OM-269631 Page 28
5-12. Proper Ring Terminal Connection To Work Sense Lead
If work sense lead is cut or broken at end
with ring terminal, be sure that new ring ter-
minal is connected as shown.
1 Jacket
2 Insulated Tape Or Heat-Shrink
Tubing
3 Center Conductor
4 Ring Terminal 1/2 in. Opening
1
Tools Needed:
3
4
2
Ref. 239 780-B
5-13. Connecting Work Sense Lead And Work Cable To Clamp
805 030-A
Tools Needed:
1/2 in.
3
2
1
1 Work Sense Lead
2 Work Cable
3 Clamp
.
Be sure that work sense lead
ring terminal is on top of work
cable ring terminal when
connecting to clamp.
Connect work sense lead and work
cable to clamp.
1/2 in.