Miller ENPAK, Owner'S Manual

Page: 59 / 96

OM-261050 Page 55
11-6. Safety Interlock Monthly Check (Models With Hydraulic Power Source)
With the EnPak engine running, turn off
+12 volts DC power to the crane system.
The EnPak engine should stop.
Check with dealer for detailed descrip-
tion of system supplied.
Power to the crane system will be sup-
plied by relays located under the hood
of the truck and activated by switches
on the parking brake or neutral trans-
mission position; and a truck-mounted
console switch if so equipped.
Try to start the EnPak engine from the
crane remote pendant or the EnPak re-
mote control panel. The safety interlock is
working properly if the EnPak engine does
not crank or start, and the remote control
panel does not have power to it.
R12 volts DC power to the crane
system. The EnPak should start and func-
tion properly.
Notes