Miller Auto-Axcess 300 CE, Owner'S Manual

Page: 31 / 76

OM-231185 Page 25
6-1 . Operational Terms (Continued)
Time Indicates time values being set for timed functions (e.g. Preflow, Postflow which are only available in the Arc On
and Analog input or the Arc On and No Analog input modes).
Volts Preset voltage in MIG mode at idle, actual voltage while welding, and 3 seconds hold value at end of weld.
Weld Sequence function that allows for a timed weld operation [(0 to 999 seconds) only available on Auto Axcess
models in the Arc On and Analog input or the Arc On and No Analog input modes, and can only be set with the
optional PDA with File Management software].
WFS Term used to represent wire feed speed. In MIG mode, wire feed setting is independent of voltage setting. In
pulse, Accu-pulse, and RMD (optional) adjusting wire feed speed also increases power level on wire electrode
(one knob control).
Wire Type Selection of wire type by alloys and classification.
Notes