Miller Auto-Axcess 300 CE, Owner'S Manual

Page: 22 / 76

OM-231185 Page 16
Ref. 803 676-B
1 115 V 10 A AC Receptacle RC2
Receptacle supplies 60 Hz
single-phase power. Maximum output
from RC2 is limited by supplementary
protector CB1 to 10 amps.
2
Supplementary Protector CB1
3 Supplementary Protector CB2
CB1 protects 115 volt receptacle RC2
from overload. If CB1 opens, RC2 does
not work.
CB2 protects the wirefeed motor from
overload. If CB2 opens, the wirefeeder
does not work.
.
Press button to reset breaker. If
breaker continue to open, contact a
Factory Authorized Service Agent.
4 Wirefeed/Gas Receptacle RC8
Use receptacle to connect gas and
motor control cable to power source
(see Sections 5-2 and 10 for additional
information).
5
Peripheral Receptacle RC25
Receptacle provides connection to
touch sensor, water flow switch, jog +/ − ,
and n/o relay contacts circuitry (see
Section 5-7).
6
Robot Interface Receptacle RC72
Use receptacle to connect robot input/
output cable (see Sections 5-2 and 10
for additional information).
2
3
5-3. Rear Panel Receptacles And Supplementary Protectors
1
6
4
5
Notes