Miller Electric 600 X, Owner'S Manual

Page: 28 / 108

OM-4428 Page 24
5-4. Installing Exhaust Pipe
1/2 in
Tools Needed:
Ref. 803 604 / Ref. 215 664
!
Stop engine and let cool.
Point exhaust pipe in desired di-
rection but always away from front
panel and direction of travel.
ether1 7/96 − 153 382-A / Ref. 215 664
!
Stop engine.
!
Improper handling or expo-
sure to ether can harm your
health. Follow manufactur-
er’s safety instructions on
cylinder.
!
Do not use Ether Starting Aid
while engine is running.
Remove rubber access plug from
cover.
1
Ether Cylinder
2 Nozzle
Remove cover and clean cylinder
nozzle.
3
Clamp
4 Fitting
5 Cap
6 Valve
Remove cap and clean fitting.
Install cylinder on fitting. Tighten
clamp.
After installing cylinder, wait at
least 10 minutes before using
to let ether particles settle and
prevent atomizer plugging.
Put cap on fitting when cylinder is
removed.
Reinstall plug in cover.
1
2
3
4
6
5
5-5. Installing Optional Ether Cylinder (Deutz F3L912 Engine Only)